Chapter 3 Volume Management
3.1 Create Volume
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
268
Creating WSV type volumes in the existing RAID group
WSVs are created by concatenating volumes that are the same size in multiple RAID groups. Input the volume
information for WSVs and the selection information for RAID groups, and specify the RAID groups that are to
be concatenated.
For detailed information about creating WSV type volumes, refer to "Creating WSV type volumes" (page 255)
.
The procedure to create WSV type volume in the existing RAID group is as follows:
1 Click [Create] in [Action].
2 Enter details of the volumes to be created and the selection information for the RAID group
where the volumes are created.
The main setting items are as follows.
● New Volume
• Name
• Capacity
• Type
● Volume Information
• Use all Largest Free Space
• Number of Volumes
• Volume No.
RAID group capacity expansion for RAID groups which configure WSVs is not available (LDE cannot be
performed).
To Next Page
Loading...
