Chapter 3 Volume Management
3.1 Create Volume
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
269
● Select RAID Group Information
• Drive Type
• RAID Level
• Number of Member Drives
3 Click the [Select RAID Groups] button.
The [Select RAID Groups] screen appears.
4 Select the RAID group that is to be concatenated (multiple selections can be made).
The main setting item is as follows.
● Select RAID Groups
• Checkbox to select RAID groups
• When specifying the volume number, select the "Set Value" checkbox and input the volume
number.
• When using the maximum free space in the selected RAID group to create WSVs without specifying
the capacity, select the "Enable" checkbox for "Use all Largest Free Space", and then input the
number of WSVs.
When a RAID group is configured with a single SSD type (SSD-M or SSD), or configured with both SSD
types (SSD-M and SSD), "SSD" is displayed as the drive type.
To Next Page
Loading...
