Chapter 7 Advanced Copy Management
7.8 REC Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
622
Create Copy Path (Create)
In this screen, set a copy path. Specify the Box ID of the target storage system in which the copy path is
created, and set the line information between storage systems.
1 Click the [Remote Storage System Box ID] link to create a copy path.
The [Copy Path Setting] dialog box appears.
2 Set a copy path in the [Copy Path Setting] dialog box.
To Next Page
Loading...
