Chapter 7 Advanced Copy Management
7.8 REC Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
628
2 Click the [Next >>] button.
A confirmation screen appears.
3 Click the [OK] button.
Application of the copy path information starts. After application is complete, the [Result of apply-
ing] screen appears
4 Check the message and click the [Next >>] button.
Displayed screen varies depending on the operation mode that is selected in [Start] screen.
■ When "Create Copy Path" is selected
The [Download File] screen appears. Proceed to "Save (Save)" (page 629)
.
■ When "Apply Copy Path" is selected
• When the copy path information file is successfully applied
The [Set Bandwidth Limit] screen appears. Proceed to "Set Bandwidth Limit (Bandwidth Limit)"
(page 632).
• When application of the copy path information file fails
The [Finish] screen appears. Click the [OK] button to display the [Finish Display] screen. Proceed
to "Finish" (page 636)
.
To Next Page
Loading...
