Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
713
A.1.7.6 Setup SNMP Agent User
For details about this function, refer to "1.8.6 Setup SNMP Agent User" (page 117).
For the factory default settings for this function, refer to "Appendix B Setup SNMP Agent User" (page 981)
.
● Setup SNMP Agent User
• User Name
• MIB View Setting
• Authentication
• Authentication Method
Description Input the user name which accesses the SNMP Agent.
The user name which has already been used cannot be entered.
Input condition/
Display contents
• 8 - 32 alphanumeric characters and symbols ("! (exclamation mark)", "# (hash
mark)", "& (ampersand)", "_ (underscore)", "+ (plus)", "- (hyphen)", "* (asterisk)" and
"/ (slash)")
• Spaces
Description Select the view name to specify the MIB access range for the user.
A "blank" means accessing the MIB is not allowed.
Input condition/
Display contents
• ViewALL
• View-mib2
• View-exmib
• The view name, which has been registered using the [Setup SNMP Agent MIB Access
View] function
If "ViewALL", "View-mib2", or "View-exmib" is deleted with the procedure in "1.8.5 Setup SNMP Agent MIB Access
View" (page 115), the deleted options are not displayed in the [MIB View Setting] screen.
Description Select whether to "Enable" or "Disable" the authentication.
Input condition/
Display contents
• Enable
• Disable
Description To enable the authentication, select the authentication method.
Input condition/
Display contents
• MD5 (Message Digest 5)
• SHA (Secure Hash Algorithm)
To Next Page
Loading...
