Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
760
A.1.10.6 Update SED Authentication Key
For details about this function, refer to "1.11.8 Update SED Authentication Key" (page 176).
For the factory default settings for this function, refer to "Appendix B Update SED Authentication Key" (page
984).
● Current SED Authentication Key Setting
• Current Key
A.1.10.7 Import SSL/KMIP Certificate
For details about this function, refer to "1.11.9 Import SSL/KMIP Certificate" (page 178).
● SSL/KMIP Certificate Setting
• SSL/KMIP Certificate File
A.1.11 Storage Migration Management
A.1.11.1 Start Storage Migration
For details about this function, refer to "1.12.1 Start Storage Migration" (page 180).
● Storage Migration
• Storage migration setting file
Description Select whether to enable ("Enabled Key") or disable ("Disabled Key") the current key.
Input condition/
Display contents
• Enabled Key
• Disabled Key
Description Click the [Browse...] button to specify the SSL/KMIP certificate file, or directly input the
path to the SSL/KMIP certificate file.
Input condition/
Display contents
• Click the [Browse...] button to specify the SSL/KMIP certificate file
• Directly input the path to the SSL/KMIP certificate file
Description Input the location where the Storage Migration setting file is stored.
Click the [Browse...] button to specify the location, or input the location directly.
Input condition/
Display contents
• Click the [Browse...] button to specify the location
• Directly input the location
To Next Page
Loading...
