Appendix A Parameter List
A.3 Volume Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
786
• RAID Level
• Key Group
Description Select the RAID level.
The specified volume type and drive type determine the selectable RAID levels that are
displayed as options.
Input condition/
Display contents
• High Performance (RAID1+0)
• High Capacity (RAID5)
• High Reliability (RAID6)
• High Reliability (RAID6-FR)
• Reliability (RAID5+0)
• Mirroring (RAID1)
• Striping (RAID0)
Description When creating volumes in the RAID group that configures the key group (*1), select
"Enable". When creating volumes in a RAID group that is not registered in the key group,
select "Disable".
This setting is available if the volume type is "Standard", "SDV", or "SDPV", and if the drive
type is "Online SED". Only the available setting (Enable or Disable) is displayed as an
option. For other drive types, the field is blank.
*1: The key group combines all of the RAID groups that use the same SED
authentication key.
Input condition/
Display contents
• Enable
• Disable
To Next Page
Loading...
