EasyManua.ls Logo

Fujitsu ETERNUS DX100 S3 - Page 793

Fujitsu ETERNUS DX100 S3
1082 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A Parameter List
A.3 Volume Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
793
Encryption by CM
Select RAID Group Information
Drive Type
Description Select the encryption status of new volumes.
When the encryption mode is disabled, "On" cannot be selected.
For the ETERNUS DX60 S3, this item is not displayed.
Input condition/
Display contents
On
Volumes that are encrypted by a CM are created.
Off
Volumes that are not encrypted by a CM are created.
When creating volumes (specifying a number greater than or equal to 1 for "Number of Volumes") for a RAID group
with "Online SED", "Nearline SED", or "SSD SED" as the drive type, select "Off" for this item.
Description Select the type of drive that configures a RAID group.
The installed drive determines the selectable drive types that are displayed.
If there are no RAID groups in which volumes can be created, the field is blank.
Input condition/
Display contents
Online
Nearline
SSD
Online/Nearline
Online SED
Nearline SED
SSD SED
Online SED/Nearline SED
When "Online" is selected, a RAID group that is configured with only "Online" type drives, or a RAID group that is
configured with both "Online" and "Nearline" type drives is specified.
When "Online SED" is selected, a RAID group that is configured with only "Online SED" type drives, or a RAID
group that is configured with both "Online SED" and "Nearline SED" type drives is specified.
When "SSD" is selected, RAID groups that are configured with a single SSD type (SSD-M or SSD), or configured
with multiple SSD types (SSD-M and SSD) are specified.
When "Online/Nearline" is selected, a RAID group that is configured with only "Online" type drives, a RAID group
that is configured with only "Nearline" type drives, or a RAID group that is configured with both "Online" and
"Nearline" type drives is specified.
When "Online SED/Nearline SED" is selected, a RAID group that is configured with only "Online SED" type drives,
a RAID group that is configured with only "Nearline SED" type drives, or a RAID group that is configured with
both "Online SED" and "Nearline SED" type drives is specified.

Table of Contents

Other manuals for Fujitsu ETERNUS DX100 S3

Related product manuals