Fujitsu ETERNUS DX100 S3 - Page 856

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
856
- CHAP User ID
- New Password
Description
• When the port mode is "CA" or "CA/RA" (CA)
When using the bidirectional CHAP authentication, enter the user ID to access
the target port.
When using the unidirectional CHAP authentication, it is not necessary to enter a
user ID. Make sure to set the user name and password together.
• When the port mode is "RA" or "CA/RA" (RA)
When "ON" is selected for "CHAP", enter the user name to access the target port.
Make sure to set the user name and password together.
Input condition/
Display contents
• When the port mode is "CA" or "CA/RA" (CA)
- Up to 255 alphanumeric characters and symbols
- Spaces
• When the port mode is "RA" or "CA/RA" (RA)
- Up to 63 alphanumeric characters and symbols
- Spaces
Description
• When the port mode is "CA" or "CA/RA" (CA)
When using the bidirectional CHAP authentication, enter the password to access
the target port.
When using the unidirectional CHAP authentication, it is not necessary to enter a
password. Make sure to set the user name and password together.
• When the port mode is "RA" or "CA/RA" (RA)
When "ON" is selected for "CHAP", enter the password to access the target port.
Make sure to set the user name and password together.
Input condition/
Display contents
• When the port mode is "CA" or "CA/RA" (CA)
- 12 - 100 alphanumeric characters and symbols
- Spaces
• When the port mode is "RA" or "CA/RA" (RA)
- 12 - 32 alphanumeric characters and symbols
- Spaces