Appendix A Parameter List
A.7 Advanced Copy Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
947
• Password
● Operation Method Selection
• Operation Method
● Storage System Information File Selection
• Storage System Information File
● Operation Method Selection
• Operation Method
Description Input the password to access the iSCSI port (can be omitted).
Make sure to set the user name and password together. The entry is displayed with "*" or
similar characters. If not specified, the field is blank.
Input condition/
Display contents
12 - 100 alphanumeric characters and symbols
Description Select whether to continue the storage system registration.
Input condition/
Display contents
• Finish of registration by file reading
• Registration from file
When selecting "Registration from file", specify a file in the "Storage System
Information File Selection" field. When 128 storage systems are already registered,
"Registration from file" cannot be selected.
Description Input the location where the device information file is stored.
Click the [Browse...] button to specify the location, or input the location directly.
Input condition/
Display contents
• Click the [Browse...] button to specify the location
• Directly input the location
Description Select whether to continue the storage system information registration.
Input condition/
Display contents
• Registration by manual operation
When selecting "Registration by manual operation", specify parameters in the
"Storage System Information Setting" field. When 128 storage systems are already
registered, "Registration by manual operation" cannot be selected.
• Finish of registration by manual operation
To Next Page
Loading...
