Fujitsu ETERNUS DX100 S3 - Page 952

Appendix A Parameter List
A.7 Advanced Copy Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
952
● Copy Path Information File Selection
• Copy path information file
● Remote Device Information
• Checkbox to select a Box ID
• Result of applying
Description Input the location where the copy path information file is stored.
Click the [Browse...] button to specify the location, or input the location directly.
Input condition/
Display contents
• Click the [Browse...] button to specify the location
• Directly input the location
Description Select the checkbox of the path information that is to be applied to the ETERNUS Disk
storage system.
This checkbox is only displayed when the path information that is created by this
function does not match the path information that is already applied.
The Box ID in the path information that is created by using this function is selected by
default.
Input condition/
Display contents
Checkbox
• Selected
• Cleared
Description The results of comparing the path information that is created by using this function and
the path information that is already applied to the ETERNUS Disk storage system are
displayed.
When the checkbox for selecting a Box ID is selected, the path information after
applying the created path information to the ETERNUS Disk storage system is displayed.
When the checkbox for selecting a Box ID is cleared, the path information before
applying the created path information to the ETERNUS Disk storage system is displayed.
• When the path setting is not to be changed, "Do not Change" is displayed
• When the path is to be added, "Add" is displayed
• When the path is not to be added, "Do not Add" is displayed
• When the path setting is to be changed, "Change" is displayed
• When the path is to be deleted, "Delete" is displayed
Refer to "Specification for applying result" (page 954)
and "Display example of an
applying result and an actual applying result" (page 955) for details. When applying the
copy path information file to the ETERNUS Disk storage system, the paths with "Add",
"Change" and "Delete" status are updated.
Input condition/
Display contents
The results of comparing the path information that is created by using this function and
the path information that is already applied to the ETERNUS Disk storage system