ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
970
Appendix B
Factory Default List
This appendix describes the default settings for the following management functions.
• System Management
• Volume Management
• Connectivity Management
• RAID Group Management
• Thin Provisioning Management
• Advanced Copy Management
The following sections describe the factory default values. Note that functions and setting items that do not
have default settings are not listed.
B.1 System Management
This section provides information on the default parameters of the following actions for system management.
• Modify Date and Time
• Change Box ID
• Setup Subsystem Parameters
• Setup Encryption Mode
• Setup SMI-S Environment
• Setup Power Management
• Setup Extreme Cache
• Setup Exclusive Read Cache
• Setup Disk Drive Patrol
• Setup Debug Mode
• Backup Configuration
• Start/Stop Performance Monitoring
• Clear Cache
• Modify Eco-mode General Setting
• Create Eco-mode Schedule
• Setup User Account
• Modify RADIUS
• Add Role
• Setup Network Environment
• Setup Firewall
• Setup SNMP Agent Basic Interface
• Setup SNMP Manager
• Setup SNMP Agent MIB Access View
To Next Page
Loading...
