Fujitsu ETERNUS DX100 S4 - Compliance Standards

Compliance Standards
● About Compliance Standards
•
Product safety
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
IEC 60950-1:2005, 2nd Edition + A1:2009 + A2:2013
ANSI/UL 60950-1:2014
CAN/CSA-C22.2 No 60950-1-07, + A1:2011 + A2:2014
CNS 14336-1:2010
IS 13252(Part 1):2010
TP TC 004/2011
•
CE marking
2014/35/EU, Low Voltage Directive
2014/30/EU, Electromagnetic Compatibility Directive
2009/125/EC, Regulation (EU) 019/424 Erp Directive (*1)
2011/65/EU, (EU) 2015/863 as amended, Restriction of Hazardous Substances (RoHS) Directive
•
Electromagnetic Compatibility (EMC)
EN 55032 Class A
EN 55024:2010
EN 61000-3-2:2014
EN 61000-3-3:2013
FCC Part-15 Subpart B Class A
ICES-003 Class A
VCCI Class A
JIS C 61000-3-2
CNS 13438:2006
AS/NZS CISPR 32 Class A 2015
TP TC 020/2011
KN32 Class A
KN35
•
Environmental compliance
2011/65/EU, (EU) 2015/863 as amended, Restriction of Hazardous Substances (RoHS) Directive
WEEE-compliant (waste electrical and electronic equipment)
•
Power conversion efficiency
80PLUS
®
GOLD
*1: The target ETERNUS DX is the ETERNUS DX100 S4/DX200 S4.
1. ETERNUS DX Installation
Compliance Standards
24
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems
Site Planning Guide
Copyright 2021 FUJITSU LIMITED
P3AM-7632-18ENZ0