Package Size
The ETERNUS DX is shipped in cardboard boxes. These boxes may not fit through some doorways or elevators. To
make sure that the ETERNUS DX can be moved to the installation site, carefully check the transport route infor-
mation.
The following table shows the package size and the maximum package weight of each component for regions
other than the EMEIA, Central American, and Caribbean regions.
Table 7 Package Size (for Regions other than the EMEIA, Central American, and Caribbean Regions)
Component
Package size (W ´ D ´
H)
Maximum weight
Controller enclosure 2.5" type
600 ´ 760 ´
240mm
Approximately 40kg
3.5" type
600 ´ 760 ´ 240mm
Approximately 40kg
Drive enclosure 2.5" type
600 ´ 660 ´ 240mm
Approximately 40kg
3.5" type
600 ´ 660 ´
240mm
Approximately 40kg
High-density type
640 ´ 1,115 ´ 625mm
Approximately 120kg
Drive (*1) 2.5" drive
160 ´ 278 ´ 106mm
Approximately 0.5kg
3.5" drive
189 ´ 300 ´
116mm
Approximately 1.2kg
Power distribution unit (*2) 1U
570 ´ 710 ´ 160mm (*3),
540 ´ 380 ´ 310mm (*4)
Approximately 4kg (*3),
Approximately 5kg (*4)
2U
(390 ´
590 ´ 180mm) ´ 2
(*5),
(540 ´ 380 ´ 310mm) ´ 2 (*6)
(Approximately 7kg) ´ 2 (*5),
(Approximately 10kg) ´ 2 (*6)
*1: When an order for optional drives to be installed in the factory is placed, enclosures are shipped with the
drives preinstalled.
When optional drives are ordered without preinstallation, each drive is shipped in an individual package.
*2: For power distribution units, there are multiple types of exteriors.
*3: These values are for product ID ETFP4BU-L.
*4: These values are for product ID ETFP4DU-L.
*5: These values are for product ID ETFP16U-L / ETFP12U-L.
*6: These values are for product ID ETFP48U-L / ETFP32U-L.
1. ETERNUS DX Installation
Package Size
25
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems
Site Planning Guide
Copyright 2021 FUJITSU LIMITED
P3AM-7632-18ENZ0
To Next Page
Loading...
