Fujitsu ETERNUS DX100 S4 - Figure 15 Example of a Power Supply Connection When a Power Distribution Unit (1 U) Is Used

■
Connection Diagrams
The following diagrams show connections between the power distribution units, the
ETERNUS DX, and the power
sockets of the distribution boards.
Do not connect just one power distribution unit to multiple ETERNUS storage systems.
● For Power Distribution Unit (1U) Connections
The following diagram shows a power supply connection example when power distribution unit (AC200-240V,
1U, 4 outlets) is used.
Figure 15 Example of a Power Supply Connection When a Power Distribution Unit (1U) Is Used
CP
Dis
tribution
board
↓ To power supply facility
↓ To power supply facility
CP
Dis
tribution
board
Power distribution unit
Line
0
Line
1
Controller
enclosure
Drive enclosure
CPCP
PSU PSU
PSU PSU
ETERNUS DX
PSU: Power Supply Unit
CP: Circuit Protector
1. ETERNUS DX Installation
Outlet/Socket Specifications
37
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems
Site Planning Guide
Copyright 2021 FUJITSU LIMITED
P3AM-7632-18ENZ0