Copyright Fujitsu Technology Solutions, Release September 2011
Hardware and Software Installation ETERNUS DX60 S2
Power Off Procedure
Power off the ETERNUS by pressing the Power switch of the
Controller Enclosure for 4 seconds
You can power off also using the ETERNUS Web GUI
• Select menu [Utilities] [Shutdown/Restart System]
The power supply of the device will shut down in 30 seconds
• If a reboot is chosen, the device will be rebooted after shutdown
Before shutting the system down
Ask customer to confirm that all
Server I/O is stopped
Check that the CACHE LED on
the Operation Panel is off
Make sure the CACHE LED
of the Controller Enclosure
is off
14
To Next Page
Loading...
