10
FUJITSU Storage ETERNUS DX60 S2 Disk storage system Read Me First
Copyright 2014 FUJITSU LIMITED
P3AM-5542-07EN
●
Underside of the DI (OUT)
side plug
●
Underside of the DI (IN)
side plug
Rear viewCable
When the drive enclosure is installed, connect the DI (OUT) port of the controller enclosure to the DI (IN)
port of the drive enclosure with the miniSAS cable.
MiniSAS Cables
-Installation- "4.3 Drive Enclosure Connection"
Plug the connectors with the " " symbol indented on them
into the DI (OUT) ports of the controller enclosure.
Controller
Enclosure
Drive
Enclosure
DI (OUT) port
DI (IN) port
Controller
Enclosure
Drive
Enclosure
Connect the power cords to the inlets of the power supply unit.
Use release ties to hold the power cords in place.
Rear viewCable
Power Cords
-Installation- "4.5 Power Cord Connection"
Plug the connectors with the " " symbol indented on them
into the DI (IN) ports of the drive enclosure.
The " " symbol is
indented here.
٠
The " " symbol is
indented here.
٤
To Next Page
Loading...
