Fujitsu ETERNUS DX60 S2 - Force Degrade

6
FUJITSU Storage ETERNUS DX60 S2 Disk storage system Read Me First
Copyright 2014 FUJITSU LIMITED
P3AM-5542-07EN
An installation space and network environment must be prepared in advance.
Prepare the following manuals:
●
Documentation CD
●
Related manuals, such as manuals for the server or the networking equipment that is used
Setup Procedures
Installation Space
-Site Planning- "2.5 Outlet/Socket Specications"
Network Environment
-Installation- "1.1 Connection Preparation"
●
-Site Planning- "2.1 Installation Specications"
●
-Site Planning- "2.4 Installation Environment"
Installation space
Check that the installation area meets the space requirements of the rack in which the ETERNUS DX Disk
storage system is to be installed.
Environmental considerations for installation
Check if the installation area for the ETERNUS DX Disk storage system meets the environmental conditions
and installation environment conditions.
Power outlets
Check the type and the number of power outlets/sockets that are required to install the ETERNUS DX Disk
storage system.
Completing and attaching the Network Settings label
Write down the following information on the Network Settings label and attach it to the controller enclosure.
●
IP address and subnet mask for the ETERNUS DX Disk storage system
●
IP address for maintenance work
Preparation
STEP
-Installation- "1.2 Setup Preparation"
Settings for the PC terminal
●
Setup Network Environment
ƪ
IP address: 192.168.1.2
ƪ
Subnet mask: 255.255.255.0
●
Set the Web browser
ƪ
Proxy server and Cache: Disable
ƪ
Java Script, style sheets, and cookies: Enable