Fujitsu ETERNUS DX60 S3 - Stable Operation; Host Response; Figure 3.17 Host Response (Connection Operation Mode)

3.8 Stable Operation
This section explains a function that sets the operation mode according to the connection environment of
the ETERNUS DX in order to enable stable operation.
3.8.1 Host Response
The server requirements of the supported functions, LUN addressing, and the method for command respon-
ses vary depending on the connection environments such as the server OS and the driver that will be used.
Responses from the ETERNUS DX can be changed to the optimal one by specifying the appropriate operation
mode for the connection environments.
Figure 3.17 Host Response (Connection Operation Mode)
Server B
Server C
Server A
Host Response settings
for Server A for Server B for Server C
ETERNUS DX
Chapter 3 Functions
3.8 Stable Operation
42
FUJITSU Storage ETERNUS DX60 S3 Disk storage system
Overview
Copyright 2014 FUJITSU LIMITED
P3AM-8972-01ENZ0