Fujitsu ETERNUS DX60 S3 - Power Distribution Units (Only for Regions Other than EMEA&I); Figure 4.10 Power Distribution Unit (AC200-240 V, 1 U, 4 Outlets); Table 4.9 Power Distribution Unit (AC200-240 V, 1 U, 4 Outlets) and Provided AC Cable Specifications

4.3 Power Distribution Units (Only for Regions Other than
EMEA
&I)
There are two sizes for power distribution units: 1U and 2U.
A power distribution unit is an option to connect power supply units to power outlets when power sockets are
limited.
■
Power Distribution Unit (AC200-240V, 1U, 4 Outlets)
There are four outlets and two inlets.
Figure 4.10
Power Distribution Unit (AC200-240V, 1U, 4 Outlets)
1
2
1. Inlet (INPUT)
2. Outlet (OUTPUT)
The specifications of a power distribution unit and the AC cables that are provided are shown below.
Table 4.9 Power Distribution Unit (AC200-240V, 1U, 4 Outlets) and Provided AC Cable Specifications
Item Specifications
Power Voltage AC 200 – 240V
Phase Single
Frequency 50Hz/60Hz
Input cable Connection type
IEC60320 C13 n NEMA L6-15P
Length 4m
Quantity 2
Chapter 4 Hardware Configurations
4.3 Power Distribution Units (Only for Regions Other than EMEA&I)
59
FUJITSU Storage ETERNUS DX60 S3 Disk storage system
Overview
Copyright 2014 FUJITSU LIMITED
P3AM-8972-01ENZ0