Fujitsu ETERNUS DX60 S3 - Microsoft Linkage; Figure 11.4 Solution - Virtualization Platform (Microsoft Linkage)

Install ETERNUS VASA Provider in the storage management server in which ETERNUS SF Storage Cruiser is op-
erating.
•
Settings for ETERNUS VASA Provider
Install ETERNUS VASA Provider in the storage management server.
Perform the settings that are related to ETERNUS VASA Provider in the vCenter Server after installation.
•
Settings for ETERNUS SF Storage Cruiser
Before starting the ETERNUS VASA Provider service, register ESXi Server and the ETERNUS DX that is to be
monitored in ETERNUS SF Storage Cruiser.
Update the configuration file and enable linkage with the device event information to apply the ETERNUS
VASA Provider settings.
For more details on the settings for ETERNUS VASA Provider, refer to "ETERNUS VASA Provider User's Guide".
For more details on the settings for ETERNUS SF Storage Cruiser, refer to "ETERNUS SF Web Console Manual"
and "ETERNUS SF Storage Cruiser Operation Guide".
11.2.3 Microsoft Linkage
■
Solution Overview
By linking with Microsoft System Center Virtual Machine Manager 2012 (SCVMM 2012), the resources and
functions of the ETERNUS DX can be controlled directly from the management console of System Center
2012.
Figure 11.4 Solution
— Virtualization Platform (Microsoft Linkage)
SMI-S
Management server
Hyper-V
App
OS
App
OS
App
OS
Hyper-V
App
OS
App
OS
App
OS
Administrator
SAN
SCVMM 2012
management console
SCVMM 2012
management environment
ETERNUS DX
Chapter 11 Solution Configuration
11.2 Virtualization Platform
157
FUJITSU Storage ETERNUS DX60 S3 Disk storage system
Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-9002-01ENZ0