■
For 3.5" Drives
1 In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all components of the
ETERNUS DX are in normal status.
2 Wear a wrist strap or touch a metal part to discharge the human body's natural static electricity.
3 Remove the dummy drive unit from the slot in which the drive is to be installed.
Push into the tab of the dummy drive unit and pull it straight out of the drive slot.
Keep the removed dummy drive units in a safe place where they will not be lost.
4 Install the new drive.
(1) Press the catch on the drive lock lever to unlock it.
(2) Insert the drive all the way into the slot, making sure that it is firmly seated and that the lock lever is
still left open.
4.
Component Expansion/Function Enhancement
Installing Additional Drives
52
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-9012-08ENZ0
To Next Page
Loading...
