• Hold the drive with both hands to protect against jarring.
(3) Swing the lock lever in the direction of the arrow, until the lock clicks shut.
(4) Check that the newly installed drive's DRIVE READY LED lights up green.
5 To install more additional drives, repeat Step 3 and Step 4.
6 If a wrist strap is used, remove the wrist strap.
7 In the [Drives] screen of [Component] on the ETERNUS Web GUI screen, check that the added drives have
been recognized.
8 Set up RAID groups, volumes, hot spares, and host affinity settings, as required.
4.
Component Expansion/Function Enhancement
Installing Additional Drives
53
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-9012-08ENZ0
To Next Page
Loading...
