Fujitsu ETERNUS DX60 S3 - Figure 1.2 3.5 Type Controller Enclosure Dimensions

● 3.5" Type Controller Enclosure
The diagrams below show the dimensions of a 3.5" type controller enclosure.
The dimension values do not include any protruding parts (approximation).
Figure 1.2 3.5" Type Controller Enclosure Dimensions
670mm
88mm
482mm
Top
Front
Side
Chapter 1 ETERNUS DX Installation
1.2 Storage System Dimensions
13
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Site Planning Guide
Copyright 2015 FUJITSU LIMITED
P3AM-8982-03ENZ0