EasyManua.ls Logo

Fujitsu ETERNUS DX60 S3 - Page 153

Fujitsu ETERNUS DX60 S3
1082 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1 System Management
1.9 Event/Dump Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
153
7 Click the [Finish] button to return to the [Event/Dump] screen.
Exporting log has been completed.
End of procedure
For a Unified Storage environment
The procedure to export logs in the Unified Storage environment is as follows:
Procedure
1 Click [Export/Delete Log] in [Action].
2 Export the storage system log.
2-1 Set the detailed information for exporting a log.
For setting items, refer to Step 2
in For a SAN environment.
When exporting the log is complete, make sure to export a panic dump.
In a Unified Storage environment, when log files are exported while the ETERNUS DX is in a high-load state,
an error may occur due to a timeout. If an error occurs and exporting fails, perform the log export again in a
low-load state.

Table of Contents

Other manuals for Fujitsu ETERNUS DX60 S3

Related product manuals