Fujitsu ETERNUS DX60 S3 - Page 445

Chapter 4 Connectivity Management
4.3 CA Port Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
445
2 Set the copy source port parameters and then click the [Copy] button.
 The [Copy Settings] screen appears.
3 Select all of the copy destination ports.
The main setting item is as follows.
● Destination
• Checkbox to select copy destination port
4 Click the [Copy] button.
 Returns to the [Modify FC Port Parameters] screen.