Fujitsu ETERNUS DX60 S3 - Page 857

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
857
- Confirm New Password
- Header Digest
- Data Digest
Description Input the same password as that entered in the New Password field.
Input condition/
Display contents
• When the port mode is "CA" or "CA/RA" (CA)
- 12 - 100 alphanumeric characters and symbols
- Spaces
• When the port mode is "RA" or "CA/RA" (RA)
- 12 - 32 alphanumeric characters and symbols
- Spaces
Description Select "OFF" not to add the Header Digest of the target port. Select "CRC32C" to add
the Header Digest.
Header Digest is a check code to be added to the header part of the iSCSI port
detailed information.
Specify "CRC32C" when the host requests to add the check code. "CRC32C" is the
algorithm that is used to create a check code.
Input condition/
Display contents
• OFF
• CRC32C
This item is displayed when the port mode is "CA" or "CA/RA".
Description Select "OFF" not to add the Data Digest of the target port. Select "CRC32C" to add the
Data Digest.
Data Digest is a check code to be added to the data area of the iSCSI port detailed
information.
Specify "CRC32C" when the host requests to add the check code. "CRC32C" is the
algorithm that is used to create a check code.
Input condition/
Display contents
• OFF
• CRC32C
• This item is displayed when the port mode is "CA" or "CA/RA".
• Data transmission might fail when "Header Digest" or "Data Digest" is enabled. In this case, select "OFF" for
"Header Digest" and "Data Digest".