Chapter 1 System Management
1.15 Firmware Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
217
2 Select the controller firmware archive that is to be applied and the application date.
The main setting items are as follows.
● Controller Firmware Archive Settings
• Controller Firmware Archive
● Schedule Settings
• Apply Date
3 Click the [Next >>] button.
A confirmation screen appears.
If an error screen appears under the following conditions, check the parameter settings.
• "Controller Firmware Archive" is not specified (when "Set File" is selected)
• "Apply Date" does not satisfy the input conditions (when "Set Date" is selected)
• A date that is earlier than the current date is entered in "Apply Date" (when "Set Date" is selected)
To Next Page
Loading...
