Fujitsu Eternus DX600 S3 - Page 218

Chapter 1 System Management
1.15 Firmware Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
218
4 Click the [OK] button.
The screen that is displayed varies depending on the current controller firmware and the controller
firmware that is to be applied.
■ When applying a controller firmware that is newer than the current controller firmware
The screen that is displayed varies depending on the selected apply date.
• When "Apply Now" is selected
 The [Apply (Immediate Apply)] screen appears. Proceed to Step 6
.
• When "Set Date" is selected
 The [Apply (Specific Date)] screen appears. Proceed to Step 9
.
■ When applying a controller firmware that is older than the current controller firmware
 A confirmation screen to apply the older controller firmware appears.
5 Click the [OK] button.
The screen that is displayed varies depending on the selected apply date.
• When "Apply Now" is selected
 The [Apply (Immediate Apply)] screen appears. Proceed to Step 6
.
• When "Set Date" is selected
 The [Apply (Specific Date)] screen appears. Proceed to Step 9
.