Chapter 4 Connectivity Management
4.1 Host Affinity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
354
5 Select a CA port group to configure a host affinity, and click the [OK] button.
The display returns to the initial screen.
• If a specific host group has been selected in the "Host Group" field, CA port groups with any of the
following conditions are not displayed:
- The affinity mode is "OFF"
- The CA port group is used by another host affinity
• If "All" has been selected in the "Host Group" field, CA port groups with any of the following
conditions are not displayed:
- The CA port group is used by another host affinity
- Member CA ports that used in other CA port groups
To Next Page
Loading...
