Fujitsu Eternus DX600 S3 - Page 737

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
737
● Informational Level
Select whether to notify of an informational event for each event type.
The input conditions and the display contents for the informational level are as follows:
• Recovery module
• Temperature restoration
• User login/logout
• Operated RAID Group
• Added/Released Hot Spare
• Operated Volume
• Power off/on Apply Firmware
Input condition/
Display contents
Checkbox
• Selected
Notify
• Cleared
Not notify
• -
Not applicable to notification
Description Select whether to notify when the failed part is recovered by taking actions such as
replacement. When notifying, select the notification method.
Description Select whether to notify when a temperature error or warning status is recovered to the
normal status. When notifying, select the notification method.
Description Select whether to notify when a user login/logout is detected. When notifying, select the
notification method.
Description Select whether to notify when the RAID group is created or deleted. When notifying,
select the notification method.
Description Select whether to notify when the hot spare disk is registered or released. When
notifying, select the notification method.
Description Select whether to notify when the volume is created or deleted. When notifying, select
the notification method.
Description Select whether to notify when the ETERNUS DX is turned off/on or when the hot
controller firmware upgrade is performed. When notifying, select the notification
method.