Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
825
• Host Response
• Checkbox to select a host
Description Select a host response that is to be assigned to a host group.
The host response list created in the ETERNUS DX is displayed.
Input condition/
Display contents
• Solaris MPxIO
• HP-UX
• AIX
• AIX VxVM
• VS850/SVC
• BS2000
• Host responses created in the ETERNUS DX
• Default
Description Select the corresponding host checkbox in the iSCSI host list, to add a host. Clear the
corresponding host checkbox in the iSCSI host list, to delete a host.
Input condition/
Display contents
Checkbox
• Selected
• Cleared
• If the iSNS server has not been configured in "4.3.8 Modify iSCSI Port Parameters" (page 446), the iSCSI host
cannot be automatically acquired.
• The following restrictions in the environment that is described below apply for the automatic acquirement of
host information (*1) even when the iSNS server is specified.
*1: "iSCSI Name", "IP Version", "IP Address", and "Alias Name"
- When one of the following OSs is used and there are multiple hosts that have the same iSCSI name but
different IP addresses, only the information of one host can be acquired.
• Windows Server 2003
• Windows Server 2008
• Windows Server 2008 R2
• Oracle Solaris 10
- When the host OS is Oracle Solaris 11, "IP Version" and "IP Address" cannot be acquired.
• The following items can be specified only for the iSCSI hosts that are selected by checkboxes; "IP Version" "IP
Address", "Alias Name", "CHAP User ID", "Change CHAP Password", "CHAP Password", and "Confirm CHAP
Password".
iSCSI hosts that are set for the host affinity of which the Virtual Volume function is enabled are not displayed.
To Next Page
Loading...
