Fujitsu Eternus DX80 S2 - Page 115

Appendix A Event Notification Message List
A.2 Message List
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Operation-
Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0
115
P 0A SSMMvp 20A00 MMvp
-
Controller Module# m ( zz ) EXP# v Out Port# p Fault
<
pppppppppppp ssssssssss rrrrr >
These messages are
notified when "Parts
Error" is enabled for
Error Severity Level in
the event notification
setting.
They are not notified
during maintenance
operations.
CM EXP Out port is disconnected.
SS : Component subtype
MM : CM module ID (10 – 11)
m : CM number (0 – 1)
zz: Model name (DX80S2 or DX90S2)
v : EXP number (0)
p : Port number (0)
pp... : Component number
ss... : Serial number
rr... : Version
P 0B
SSMMnn 20B00 MMnn
-
Controller Module# m ( zz ) Cache(MEM # x GB)
Slot#
nn Fault < pppppppppppp ssssssssss rrrrr >
CM memory is disconnected.
SS : Component subtype
MM : CM module ID (10 – 11)
m : CM number (0 – 1)
zz: Model name (DX80S2 or DX90S2)
x : Capacity of the cache memory (2 or 4)
nn : Slot number of the cache memory (0)
pp... : Component number
ss... : Serial number
rr... : Version
P 0C
SSMM 0 v 20C00 MM 0 v
-
Controller Module# m ( zz ) BUD# v (# xx GB) Fault
<
pppppppppppp ssssssssss rrrrr >
CM BUD is disconnected.
SS : Component subtype
MM : CM module ID (10 – 11)
m : CM number (0 – 1)
zz: Model name (DX80S2 or DX90S2)
v : Device number (0)
xx : Capacity of BUD (2)
pp... : Component number
ss... : Serial number
rr... : Version
P 0E
SSMM 00 2 0E00 MM 00
-
Controller Module# m ( zz ) NAND Controller Fault
<
ppppppppppppp ssssssssss rrrrr >
CM NAND Controller is disconnected.
SS : Component subtype
MM : CM module ID (10 – 11)
m : CM number (0 – 1)
zz: Model name (DX80S2 or DX90S2)
pp... : Component number
ss... : Serial number
rr... : Version
Event type
code
SNMP Trap Upper: Message
Remarks
Trap
No.
TrapItemID
Trap
Sensor
Info
Lower: Description