Fujitsu Eternus DX80 S2 - Page 148

Appendix A Event Notification Message List
A.2 Message List
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Operation-
Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0
148
● When the event type is "R"
The following messages are sent when a normal state is restored for Error or Warning level events.
• Meaning of symbols
• Message list
*1: This row indicates TrapWarningInfo for Trap No. 25 and TrapSensorInfo for Trap No. 26.
Symbol Meaning
SS Component subtype
MM CM module ID (10 – 11)
m CM number (0 – 1)
zz Model name (DX80S2 or DX90S2)
pp... Component number
ss... Serial number
rr... Version
eEXP number (0)
i IOM number (0 – 1)
d PSU number (0 – 1)
uu DE-ID ("00" for a controller enclosure)
Event type
code
SNMP Trap Upper: Message
Remarks
Trap
No.
TrapItemID (*1) Lower: Description
R 01
SSMM 00 25 0100 MM 00 0 Controller Module# m ( zz ) Normal < pppppppppppp
ssssssssss r rrrr >
These messages are
notified when "Recov-
ery module" is
enabled for Informa-
tional Level in the
event notification
setting.
Normal status is restored for a CM error.
R 06
SSMM 0 v 25 0600 MM 0 v 0 Controller Module# m ( zz ) EXP# e Normal
<
pppppppppppp ssssssssss r rrrr >
Normal status is restored for a CM EXP error.
R 90
SSuu 0 n 25 9000 uu 0 n 0IOM6 DE# uu /IOM# i Normal < pppppppppppp ssssssssss
r
rrrr >
Normal status is restored for a DE IOM error.
R D2
SSuu 0 n 22 D200 uu 0 n - Power Supply Unit DE# uu /PSU# d Normal
<
pppppppppppp ssssssssss rrrrr >
Normal status is restored for a PSU error.
R DA
SSuu 00 26 DA00 uu 00 0 DE Exhaust temperature DE# uu Normal These messages are
notified when "Tem-
perature restoration"
is enabled for Infor-
mational Level in the
event notification
setting.
Normal status is restored for an exhaust temperature
error in CE or DE.
R DB
SSuu 00 26 DB00 uu 00 0 DE Intake temperature DE# uu Normal
Normal status is restored for an intake temperature
error in CE or DE.