Appendix B Audit Log List
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Operation-
Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0
181
02110001 Set Flexible Tier Mode The Flexible Tier function is enabled or disabled.
$a
: Mode (Enable, Disable)
[Mode=
$a
]
02110002 Create Flexible Tier Pool The Flexible Tier Pool is created.
$a
: Flexible Tier Pool number
$b
: Flexible Tier Pool name
$c
: Warning threshold [%] (5 – 99)
$d
: Attention threshold [%] (5 - 80, None)
$e
: Encryption mode (Enable, Disable)
[No=
$a
Name=
$b
Warning=
$c
Attention=
$d
Encryption=
$e
]
02110003 Set Flexible Tier Pool The Flexible Tier Pool settings are changed.
$a
: Flexible Tier Pool number
$b
: Flexible Tier Pool name
$c
: Warning threshold [%] (5 – 99)
$d
: Attention threshold [%] (5 - 80, None)
[No=
$a
Name=
$b
Warning=
$c
Attention=
$d
]
02110004 Format Flexible Tier Pool The Flexible Tier Pool is formatted.
$a
: Flexible Tier Pool number
$b
: Mode (All, Unformatted)
[No=
$a
Mode=
$b
]
02110005 Delete Flexible Tier Pool The Flexible Tier Pool is deleted.
$a
: Flexible Tier Pool number
[No=
$a
]
02110006 Create Flexible Tier Sub Pool The Flexible Tier Sub Pool is created.
$a
: Flexible Tier Sub Pool number
$b
: Flexible Tier Sub Pool name
$c
: Flexible Tier Pool number
$d
: Drive type (Online, Nearline, SSD, SED)
$e
: RAID level (RAID0, RAID1, RAID1+0, RAID5,
RAID5+0, RAID6)
$f
: Drive (DE-ID + Slot number (example:
0000, 0001, 0002))
$g
: Assigned CM (0, 1)
$h
: Stripe Depth (64KB, 128KB, 256KB,
512KB, 1024KB)
[No=
$a
Name=
$b
FTRP_No=
$c
Attribute=
$d
Level=
$e
[Disk=
$f
CM=
$g
] Stripe_Depth=
$h
]
02110007 Set Flexible Tier Sub Pool The Flexible Tier Sub Pool settings are changed.
$a
: Flexible Tier Sub Pool number
$b
: Flexible Tier Sub Pool name
$c
: Assigned CM (0, 1)
[No=
$a
Name=
$b
CM=
$c
]
02110008 Expand Flexible Tier Sub Pool The Flexible Tier Sub Pool capacity is expanded.
$a
: Flexible Tier Sub Pool number
$b
: Drive (DE-ID + Slot number (example:
0000, 0001, 0002))
$c
: Assigned CM (0, 1)
[No=
$a
[Disk=
$b
CM=
$c
]]
02110009 Start FTRPE Migration FTRPE migration is started.
$a
: FTRPE ID
$b
: Flexible Tier Sub Pool number
[ID=
$a
FTSP_No=
$b
]
0211000A Stop FTRPE Migration All of the waiting FTRPE migrations are deleted.
$a
: Delete FTRPE migration in error status
(Enable, Disable)
[Stop_Error=
$a
]
0211000B Start Balancing Flexible Tier Pool Balancing of Flexible Tier Pool is started.
$a
: Flexible Tier Pool number
[No=
$a
]
0211000C Stop Balancing Flexible Tier Pool Balancing of Flexible Tier Pool is stopped.
$a
: Flexible Tier Pool number
[No=
$a
]
Event code
Upper: Message
Description
Lower: Detailed information
To Next Page
Loading...
