Chapter 5 Maintaining Optional Products
5.1 Installing Drives
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Operation-
Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0
68
3 Remove the dummy drive unit from the slot in which the drive is to be installed.
Push into the tab of the dummy drive unit and pull it straight out of the drive slot.
4 Install the new drive.
4-1 Press the catch on the drive lock lever to unlock it.
4-2 Insert the drive all the way into in the slot, making sure that it is firmly seated and keeping the lock
lever open.
The removed dummy drive unit should be retained for future use.
Catch
Lock lever
To Next Page
Loading...
