Chapter 5 Maintaining Optional Products
5.4 Installing Long Wave SFP+ Modules (16Gbit/s)
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Operation-
Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0
92
10 If a wrist strap is used, remove the wrist strap.
11 Turn on the ETERNUS DX Disk storage system.
Refer to "2.1.3 Powering On" (page 36) for details on how to turn on the ETERNUS DX Disk storage
system.
12 Check that the LINK/FAULT LED for the FC port on the replaced Long wave SFP+ module
(16Gbit/s) turns off or lights up green.
13 Start ETERNUS Web GUI to check the status of the newly added Long wave SFP+ module
(16Gbit/s).
On the Internal Parts information in the [Channel Adapter Details] screen of ETERNUS Web GUI, check
that the FC port status is Normal and the SFP type is changed to "16G SFP+(SMF)". In addition, confirm
that all of the other components are in normal status.
To Next Page
Loading...
