Fujitsu Eternus DX80 S2 - Page 101

Chapter 5 Setup
5.1 Basic Setup
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Installation-
Copyright 2013 FUJITSU LIMITED P3AM-4832-07ENZ0
101
4 Set the required items and click the [Create] button.
The following screen shows the settings that are displayed when "Automatic" is selected.
A confirmation screen appears.
5 Click the [OK] button.
The RAID group is registered and the registration completion screen appears.
6 Click the [Done] button.
The screen display returns to the [RAID Groups] screen.
End of procedure