Chapter 5 Setup
5.1 Basic Setup
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Installation-
Copyright 2013 FUJITSU LIMITED P3AM-4832-07ENZ0
103
4 Enter the name of the volume that is to be created in "Name", set the required items, and
click the [Create] button.
The following screen shows the settings that are displayed when creating a Standard type volume in an
automatically selected RAID group.
A confirmation screen appears.
5 Click the [OK] button.
The volume is created and the registration completion screen appears.
6 Click the [Done] button.
The screen display returns to the [Volumes] screen.
5.1.5.3 Hot Spare Registration
Register the hot spare for the failure of a drive.
Check the factory settings and register a hot spare as required.
The following two types of hot spare are available:
• Global Hot Spare
This is available for any RAID group.
• Dedicated Hot Spare
This is only available to one specified RAID group.
For a RAID group that contains important data, assign "Dedicated Hot Spares", in order to preferentially
improve the RAID group's access to hot spares.
To Next Page
Loading...
