Fujitsu Eternus DX80 S2 - Page 115

Chapter 5 Setup
5.1 Basic Setup
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Installation-
Copyright 2013 FUJITSU LIMITED P3AM-4832-07ENZ0
115
5.1.6.4 LUN Group Addition
Add a group of volumes that can be recognized by the host (LUN group).
For each LUN group, volume numbers are assigned for the Logical Unit Numbers (LUNs) that are recognized
by the server.
LUN groups can be recognized by the host by using the "Create Host Affinity" function to assign a CA port
group and a LUN group to a host group.
The procedure to create a LUN group is as follows:
Procedure
1 Click the [Connectivity] tab on the navigation of the ETERNUS Web GUI screen. On the
[Connectivity] screen, click "LUN Group" in [Category].
The [LUN Group] screen appears.
2 In [Action], click "Modify LUN Group".
The [Modify LUN Group] screen appears.
3 Enter the LUN group name in [LUN Group Setting]. Click the [Add] button in [Define LUN
Group].
The [Add LUN] screen appears.
4 Enter the number for the first LUN and number of LUNs to allocate to the LUN group in [LUN
Setting], select the number for the first volume to be allocated, and click the [OK] button.