Fujitsu Eternus DX80 S2 - Figure 2.30 Power Distribution Unit for DX80 S2;DX90 S2 (AC200-240 V, 2 U, Max 8 Enclosures Connection)

To Next Page

To Previous Page

Chapter 2 Components

2.3 Power Distribution Units (For Regions other than EMEA&I)

ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Installation-

■ Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 2U, Max 8 enclosures

connection)

There are 16 outlets.

Figure 2.30 Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 2U, Max 8 enclosures connection)

● Part explanation

• Main line switch

This turns on and off the power distribution unit.

• Outlet (OUTPUT)

This is a socket (IEC60320-C13) for outgoing power supply. This socket is used to connect a power cord (AC

output cable).

Outlets (OUTPUT)

Main line switches

Other manuals for Fujitsu Eternus DX80 S2