Fujitsu Eternus DX80 S2 - Page 64

Chapter 3 Rack Installation
3.3 Installing Drive Enclosure
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Installation-
Copyright 2013 FUJITSU LIMITED P3AM-4832-07ENZ0
64
5 For regions other than EMEA&I, attach the brackets to the rack rails (for the left and right
sides).
Use the thumb screws to attach the brackets at the specified locations on the rear side.
End of procedure
Right
3.5" type
drive enclosure
2.5" type
drive enclosure
Left
Attachment location of the bracket
2.5" type
drive enclosure
3.5" type
drive enclosure
Bracket
Thumb screw