Fujitsu Eternus DX80 S2 - Initial Setup

Chapter 5 Setup
5.1 Basic Setup
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Installation-
Copyright 2013 FUJITSU LIMITED P3AM-4832-07ENZ0
92
4 Enter the Username and Password.
User name: root
Password: root (by default)
After logging in, the initial setup screen of ETERNUS Web GUI appears.
End of procedure
5.1.4 Initial Setup
Perform the settings that are required before operation of the ETERNUS DX Disk storage system on the initial
setup screen.
Perform the following settings according to the wizard screen:
• Set Storage System Name
• Set Date and Time
• Change Password
• Register Thin Provisioning License
• Register Copy License
• Register SED Authentication Key
• Set Network Environment