Fujitsu Eternus DX80 S2 - Remote Power Operation (Wake on LAN); Figure 5.22 Power Control Using Wake on LAN

Chapter 5 Basic Functions
5.5 Operation Monitoring
ETERNUS DX80 S2/DX90 S2 Disk storage system Overview
Copyright 2013 FUJITSU LIMITED P3AM-4812-11ENZ0
75
5.5.7 Remote Power Operation (Wake On LAN)
Wake On LAN is a function that turns on the ETERNUS DX Disk storage system via a network. When "magic
packet" data is sent from an administration terminal, the ETERNUS DX Disk storage system detects the packet
and the power is turned on.
To perform Wake On LAN, utility software for Wake On LAN is required and settings for Wake On LAN must be
performed.
The MAC address for the ETERNUS DX Disk storage system can be checked on ETERNUS Web GUI.
Figure 5.22 Power control using Wake On LAN
LAN
Packet transmission
Administration
terminal
Wake On LAN
utility
ETERNUS DX Disk
storage system