Fujitsu Eternus DX80 S2 - Table 6.2 List of Functions (Copy Methods)

Chapter 6 Optional Functions
6.2 Backup (Advanced Copy)
ETERNUS DX80 S2/DX90 S2 Disk storage system Overview
Copyright 2013 FUJITSU LIMITED P3AM-4812-11ENZ0
81
The following table shows the copy functions (copy methods) that are available by registering the license:
Table 6.2 List of functions (copy methods)
*1: When an Advanced Copy Feature License is not purchased, up to eight SnapOPC+/QuickOPC sessions can be used. Try
using the Advanced Copy functions to evaluate them before purchase or to plan for their use after purchase.
Copying is performed for each LUN. Copying can also be performed for each logical disk (such as the partition
and volume (the name differs depending on the OS)) when using ETERNUS SF AdvancedCopy Manager.
Copy License Model Number of
usable
sessions
Controlling software
ETERNUS Web
GUI or
ETERNUS CLI
VSS ETERNUS SF
Advanced
Copy Manager
ETERNUS SF
Express
No license
DX80 S2
DX90 S2
8 (*1) SnapOPC+ SnapOPC+
QuickOPC
–SnapOPC+
License
DX80 S2 1,024 SnapOPC+ SnapOPC+
QuickOPC
SnapOPC
SnapOPC+
QuickOPC
OPC
EC
SnapOPC
SnapOPC+
QuickOPC
OPC
EC
DX90 S2 2,048 SnapOPC+ SnapOPC+
QuickOPC
SnapOPC
SnapOPC+
QuickOPC
OPC
EC
REC
SnapOPC
SnapOPC+
QuickOPC
OPC
EC
REC
• When a volume is copied on a per LUN basis, RAID Migration that expands the migration destination
capacity cannot be performed. When RAID Migration is performed for a volume to expand the migration
destination capacity, the volume cannot be copied on a per LUN basis.
• For volumes with a copy session, restrictions apply to volume capacity expansion, such as LUN
Concatenation and Thin Provisioning volume capacity expansion.
For details, refer to "ETERNUS Web GUI User’s Guide".