Fujitsu Eternus DX80 S2 - Start Balancing-Flexible-Tier-Pool

To Next Page

To Previous Page

Chapter 3 Configuration Settings and Display

3.2 Flexible Tier Management > start balancing-flexible-tier-pool

ETERNUS CLI User’s Guide

107

start balancing-flexible-tier-pool

This command starts evenly relocating the Flexible Tier Volumes (FTVs) among RAID groups.

Specify the FTRP that is to be balanced.

■ Syntax

■ Parameter

■ Example(s)

start balancing-flexible-tier-pool {-ftrp-number

ftrp_number

| -ftrp-name

ftrp_name

}

-ftrp-number

-ftrp-name

This parameter specifies the FTRP to which the FTV to start balancing is allocated. For details,

refer to "1.2.6 Flexible Tier Pool Syntax" (page 21)

The following example starts balancing FTRP01:

CLI> start balancing-flexible-tier-pool -ftrp-name FTRP01

Other manuals for Fujitsu Eternus DX80 S2