Chapter 3 Configuration Settings and Display
3.2 Flexible Tier Management > stop balancing-flexible-tier-pool
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
108
stop balancing-flexible-tier-pool
This command stops evenly relocating the Flexible Tier Volumes (FTVs) among RAID groups.
Specify the FTRP that is being balanced.
■ Syntax
■ Parameter
■ Example(s)
stop balancing-flexible-tier-pool {-ftrp-number
ftrp_number
| -ftrp-name
ftrp_name
}
-ftrp-number
or
-ftrp-name
This parameter specifies the FTRP to which the FTV to stop balancing is allocated. For details,
refer to "1.2.6 Flexible Tier Pool Syntax" (page 21)
.
The following example stops balancing FTRP01:
CLI> stop balancing-flexible-tier-pool -ftrp-name FTRP01
To Next Page
Loading...
