Fujitsu Eternus DX80 S2 - Delete Raid-Group

To Next Page

To Previous Page

Chapter 3 Configuration Settings and Display

3.3 RAID Group Management > delete raid-group

ETERNUS CLI User’s Guide

117

delete raid-group

This command deletes an existing RAID group(s). A RAID group cannot be deleted if one or more volumes

exist in the RAID group.

■ Syntax

■ Parameter

■ Example(s)

• RAID groups cannot be deleted until the expansion process is complete.

• All volumes in a specified RAID group must be deleted before the RAID group is deleted.

delete raid-group {-rg-number

rg_numbers

| -rg-name

rg_names

}

-rg-number

-rg-name

This parameter specifies RAID group identifiers. One or more RAID group identifiers can be

specified. For details, refer to "1.2.8 RAID Group Syntax" (page 22)

The following example deletes the RAID group named "R1":

CLI> delete raid-group -rg-name R1

The following example deletes consecutive RAID groups #1 - #8:

CLI> delete raid-group -rg-number 1-8

Other manuals for Fujitsu Eternus DX80 S2