Chapter 3 Configuration Settings and Display
3.3 RAID Group Management > show raid-group-progress
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
120
show raid-group-progress
This command displays the progress of the Rebuild/Copy back process and the expansion process of all RAID
groups. Individual RAID groups can also be specified.
■ Syntax
■ Parameter
■ Output
■ Example(s)
show raid-group-progress [-rg-number
rg_numbers
| -rg-name
rg_names
]
-rg-number
or
-rg-name
Optional. This parameter specifies RAID group identifiers. If the RAID group identifier is
omitted, a progress list of all the RAID groups is displayed. For details, refer to "1.2.8 RAID
Group Syntax" (page 22).
# RAID Group Status Rebuild/Copyback Expanding
# No. Name Progress Progress
# 0 RAIDGROUP001 Copyback 87% -
# 1
RAIDGROUP012 Available - 19%
A B C D E
A: A RAID group number
B: A RAID group name
C: RAID group status
D: Progress status of Rebuild/Copyback
E: Progress status of expanding RAID groups (Logical Device Expansion)
The following example displays a progress list of all the RAID groups:
CLI> show raid-group-progress
RAID Group Status Rebuild/Copyback Expanding
No. Name Progress Progress
0 RAIDGROUP001 Copyback 87% -
1 RAIDGROUP012 Available - 19%
2 RAIDGROUP013 Available 87% -
3 RAIDGROUP014 SED Locked 0% -
The following example displays only the progress status of the RAID group #1:
CLI> show raid-group-progress -rg-number 1
RAID Group Status Rebuild/Copyback Expanding
No. Name Progress Progress
1 RAIDGROUP012 Available - 19%
To Next Page
Loading...
