Chapter 3 Configuration Settings and Display
3.3 RAID Group Management > release dedicated-spare
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
127
release dedicated-spare
This command releases a dedicated hot spare(s). The disk will then have an unassigned (present) status.
■ Syntax
■ Parameter
■ Example(s)
release dedicated-spare -disks
disks
-disks This parameter specifies the disks that are registered as Dedicated Hot Spares. One or more
disks can be specified. For details, refer to "1.2.3 Disk Syntax" (page 19)
.
The following example releases Dedicated Hot Spare #110:
CLI> release dedicated-spare -disks 110
The following example releases Dedicated Hot Spares #110 and #111:
CLI> release dedicated-spare -disks 110,111
To Next Page
Loading...
